Power supply | 100-240VAC~ 50/60Hz |
---|---|
Power consumption | Max. 8VA |
Display method | 11 segment, LCD type (operating value display part: 7 segment) |
Sampling cycle | 50 / 100 / 250 ms (parameter) |
Option input_CT input | • 0.0-50.0 A (primary current measurement range) • CT ratio: 1/1 |
Option input_Digital inputs | • Contact – ON: ≤ 2 kΩ |
Control output_Relay | 250VAC~ 3A 1a |
Control output_Current | DC 0 – 20 mA or DC 4 – 20 mA (parameter), Load resistance: ≤ 500 Ω |
Option output_Alarm | 250VAC~ 3A 1a |
Option output_Comm. | RS485 |
Control type_Type | ON/OFF, P, PI, PD, PID |
Control type_Multi SV | ≤ 4 SV |
Control type_Group PID | ≤ 8 group |
Control type_Zone PID | 4 zones |
Control type_ARW | 50 to 200 % |
Program control_Program | ≤ 10 patterns |
Program control_Step | ≤ 200 steps (1 pattern: ≤ 20 steps) |
Program control_Setting type | Time setting |
Hysteresis | • Thermocouple, RTD: 1 to 100 (0.1 to 100.0) ℃/℉ • Analog: 1 to 100 digit |
Dielectric strength | Between primary terminal and case: 3,000 VAC~ 50/60 Hz for 1 min |
Vibration | 0.75 mm amplitude at frequency of 5 to 55 Hzin each X, Y, Z direction for 2 hours |
Relay life cycle_Mechanical | • OUT1/2: ≥ 5,000,000 operations • AL1/2/3/4/5/6: ≥ 20,000,000 operations |
Relay life cycle_Electrical | • OUT1/2: ≥ 200,000 operations • AL1/2/3/4/5/6: ≥ 100,000 operations |
Insulation resistance | ≥ 100 MΩ (500 VDC megger) |
Insulation type | Double insulation or reinforced insulation (mark: , dielectric strength between the measuring input part and the power part: 3 kV) |
Noise immunity | ±2 kV square shaped noise by noise simulator (pulse width: 1 ㎲) R-phase, S-phase |
Memory Protection | ≈ 10 years (non-volatile semiconductor memory type) |
Ambient temperature | -10 to 50 ℃, storage: -20 to 60 ℃ (no freezing or condensation) |
Ambient humidity | 35 to 85%RH |
Protection structure | IP65 (Front panel, IEC standards) |
Loader port | Front side |
Accessories | Bracket |
Weight | 301 g |
کنترلر دما سری TNL-P46CR-RS-014 آتونیکس
ویژگی کنترلر دما سری TNL-P46CR-RS-014 آتونیکس
- منبع تغذیه: 100-240VAC~50/60Hz
- خروجی_رله کنترل: 250VAC~ 3A 1a
- خروجی_جریان کنترل: DC 0 – 20 mA یا DC 4 – 20 mA (پارامتر)، مقاومت بار: ≤ 500 Ω
- گزینه خروجی_آلارم: 250VAC~ 3A 1a
- گزینه output_Comm. : RS485
- برنامه کنترل_برنامه: ≤ 10 الگو
- درگاه لودر: سمت جلو
دیدگاهها
هیچ دیدگاهی برای این محصول نوشته نشده است.
دیدگاهها
هیچ دیدگاهی برای این محصول نوشته نشده است.